MaxSpare offers many customised sealing solutions which are developed in-house with help of its State-of-Art Laboratory and advanced technologies to meet the international standards.

MaxSpare had a dedicated R & D team that offers support to technical consultation which helps to give the assurance to the customers about the offered sealing solutions.

MaxSpare conducts in-house testing on the rotary seals to confirm theorotical analysis for operating conditions, decrease the failure rates during trial runs and improve the efficiency on new seal developments. The conclusion of these testings strongly support us to recommend the seal design and material for the required end use application.

Rotary Seal Gyration Testing Machine -

Specification:

	Low Pressure	High Pressure
Test Range	5 - 100 dia.	5 - 80 dia.
Speed	200 - 6000 RPM	200 - 6000 RPM
Temperature	RT - 120°C	TR - 120°C
Pressure	0 - 3 kg/cm2	5 - 30 kg/cm2

This machine is for Rotary Seal pressure conditions & abrasion testing.

Automated Optical Inspection Machine -

Specifications:

• Repeatedly less than 0.01m
• Capacity 1 - 2 nos. / sec
• The machine measures the inner and outer diameter of seal roundness.
• Measuring the cross section, inner/outer flash and concentricity of the Seal.

In-house test result of Rotary Seal - AIK & AIN

Sealing Material:

MaxSpare thus offers seals in wide range of elastomers & thermoplastics. Thanks to its state-of-art laboratory where new compound are developed and tested according to the international standards & parameters.

Rubbers like HNBR with PTFE fillers compound developed especially for working condition like dry run, high speed, low friction and high abrasion resistance.

MaxSpare, style AIK & AIN rotary seals with enhanced NBR compounds offers extended service life compared to the general purpose rotary seal.

Note: The Information given on this page are based on our many years of experience in this field. But still some of the information may vary according to the process applications. Thus maxspare is geared up to cater sealing requirement for new applications.